Sought after Bryston DAC With BR2 Remote.
Description: Digital-to-analog converter with remote control of digital input and volume. Digital inputs: USB 1.1, four S/PDIF electrical (RCA, BNC);
two S/PDIF optical (TosLink), AES/EBU (XLR).
Digital input sample rates accepted: 32, 44.1, 48, 88.2, 96, 176.4, and 192kHz (transformer-coupled S/PDIF, AES/EBU); 32–48kHz,
USB. Input word lengths accepted: 16–24-bit, S/PDIF and AES/EBU; 16-bit, USB. Digital output: S/PDIF bypass loop output via RCA jacks.
Control inputs: RS-232 port via 9-pin subminiature connector; remote 12V power-on/off trigger.
Analog outputs: 1 pair each RCA, balanced XLR.
Maximum output level: 2.3V RMS unbalanced, 4.6V balanced. Output impedance: 100 ohms balanced, 50 ohms unbalanced.
Frequency response: 20Hz–20kHz, ±0.1dB. THD+noise at 1kHz: 0.002%. IMD (CCIF): 0.0003%, 19+20kHz.
Channel separation: 109dB at 1kHz. Output noise: <4ÊV or –100dB, 20Hz–20kHz (ref. 1V). Signal/noise: 140dB.
Dynamic range at –60dBFS: 123dB. Jitter: <250ps peak–peak. Power consumption: 10VA.
Works as it should
Some very light marks to the case otherwise condition is excellent
