General:
Standout Features for the Moon 300D v1 Upsampling DAC
• Burr Brown PCM1793 high-resolution 24-bit/192-kHz D/A and 8x oversampling
• Internal upsampling which uses 24-bit / 352.8kHz processing
• Oversized power supply with 8 stages of voltage regulation
• Single-ended RCA and Balanced XLR analog outputs
• Accurate digital clocking system for exceptionally low intrinsic jitter levels
• Advanced analog signal path using a DC servo circuit and proprietary analog filter
• Pure copper circuit board tracings with extremely low impedance characteristics
Specs:
Type: Solid State
Front Panel Controls: Standby / Input Selector
LED Indicators: Locked Sampling Frequency / Input
Digital Input Types: S/PDIF (RCA) x 2 USB x 1 TosLink x 1
Digital Input Impedance: S/PDIF 75 Ohms @ 0.5 Volts
DAC / Digital Filter: BurrBrown PCM1793
Bit-depth range: - S/PDIF, Toslink 16 - 24 bits
Bit-depth range: - USB 16 bits
Sampling Frequency Rate range: - S/PDIF, Toslink 32, 44.1, 48, 88.2, 96, 176.4 and 192kHz
Sampling Frequency Rate range: - USB 32 - 48kHz
Frequency Response (audible): 20Hz - 20kHz +0/-0.2dB
Frequency Response (full range): 2Hz - 72kHz +0/-3dB
THD @ 1kHz, 0dBFS (A-weighted): < 0.001 %
IMD < 0.004 %
Dynamic Range: > 116dB
Signal-to-noise ratio: > 115dB @ full output
Slew Rate: 50V/µs
Channel Separation: > 115dB
Low Level Linearity: ±1.0dB to below 120dBFS
Intrinsic Jitter: < 25 picoseconds RMS
Single-ended Output: (RCA) 1 pair
Balanced Output: (XLR) 1 pair
Max. Analog Output: @ 0dBFS - RCA 2.0 Volts
Max. Analog Output: @ 0dBFS - XLR 2.0 Volts
Output Impedance: - Single-Ended 100 Ohms
Output Impedance: - Balanced 100 Ohms
IR input: 1/8" mini-jack
Power Consumption: 5 Watts
AC Power Requirements: 120V / 60Hz 240V / 50Hz
Fuse Replacement: - 120V 0.2A short slow blow
Fuse Replacement: - 230V 0.1A short slow blow
Dimensions:
7.5 x 3.25 x 11 in. (19 x 8 x 28 cm.)
Weight:
7 lbs.
