General
- Manufacturer: Pioneer
- Model: SA-9500
- Type: Integrated amplifier
- Years of manufacture: 1975 - 1976
- Made in: Japan
- Color: wood / metal silver
- Remote control: no
- Power consumption: 665 W (max)
- Dimensions: 420 x 165 x 403 mm (WxHxD)
- Weight: 17,2 kg
- Original price approx.: 1'960 DM
Connections
- Number of inputs:
- 2x Phono: 2.5 mV / 50 kOhm (35/50/70/100 kOhm selectable for Phono 2).
2x Aux, 1x Tuner: 150 mV / 100 kOhm 2x Tape: 150 mV / 100 kOhm
-
- Power In: 1 V / 80 kOhm
- Microphone: 6 - 24 mV / 85 kOhm
- Number of outputs:
- 2x Tape
- Pre Out
- Headphones (6.3 mm jack, front)
- 2 pairs of loudspeakers
Technical Data
- Continuous power
- 8 Ohm: 2x 80 W (20-20,000 Hz)
4 Ohm: 2x 110 W (1 kHz)
- Dynamic power
- 8 Ohm:
- 4 Ohm:
- Total harmonic distortion: 0.1%
- Attenuation factor:
- Frequency Response:
- Aux: 7 - 40,000 Hz (+0/-1 dB).
- Power bandwidth: 5 - 40,000 Hz
- Signal-to-noise ratio:
- Phono: 70 dB
- Tuner, Tape: 90 dB
- Stereo channel separation:
- Tone control:
- Bass: ±10 dB (at 25/50/100 Hz), Transition: 100/200/400 Hz (selectable).
- Treble: ±10 dB (at 8/16/32 kHz), transition: 2/4/8 kHz (selectable).
- Loudness: NO
- High Filter: 8/12 kHz selectable (12 dB/oct)
- Low Filter (Subsonic): 15/30 Hz selectable (12 dB/oct)
- Mute: -15 dB, -30 dB
- Direct/Line-Straight: yes
Special Features
- Separable pre-/power stage
- Level Control for Phono
Cosmetic Condition
face plate is very clean. The small corner ding on one bottom corner is barely visible, the top of the case has some light wear which is visible in the photos, Eugene has given this unit a clean and bench test! Passed with flying colours!!
